We continue our serialisation of the memories of Merthyr in the 1830’s by an un-named correspondent to the Merthyr Express, courtesy of Michael Donovan.
Bidding goodbye to Plymouth, let us walk up to Penydarren, but to fall into line with what has been previously stated, now imagine ourselves at the old turnpike gate close to the Morlais Castle Inn. The road inclining to the right must now be followed.
After a short time the tramroad from the basin would be crossed, and only a few yards previously, the branch into the works would be seen. The gates, or rather the lower gates of the works are here, and passing through, the works would be virtually surrounding you, at least the rail shed, the brickyard, an the new mill, but persons other than hauliers with their horses etc. were not allowed in that way, so we must keep to the turnpike road for a short distance, having the tramway on the left, when another gate would be come to opposite the entrance to Penydarren Park.
A composite of parts of the 1851 Ordnance Survey Map showing Penydarren House and Gardens (left) and the Penydarren Ironworks (right)
Only a few yards further on the tramway again crosses the road, and over this very crossing the turnpike gate (the Penydarren gate) was hung. The gate house on the left was only recently removed by the District Council.
The clump of buildings on the right from the entrance gate to the works was agents or other employees residences, with the offices of the works in front of them. The tramroad kept to the right, and did not rise as fast as the turnpike road. There were no houses on the right-hand side of the road until the tramroad from the Morlais Limestone Quarries had been crossed.
The first come to was occupied by Mr Morgan, the blast furnace manager, but there were some cottages on the left before coming to the tramroad. There was a brick cistern near the crossing that was made for the use of the locomotives at work on the lower, or basin road, and upon one occasion, while being filled, the boiler exploded.
Before proceeding further, let us glance at the prospect on the right. Immediately in front were the blast furnaces, five in a row and one detached, a little to the right; but before reaching them the Morlais Brook, or dingle in which it ran, would be seen, then a long incline leading up on the left. This was used for the removal of cinders or other refuse, no doubt, after the tip on the riverside had become as large as could well be. On the other side of the incline were the blast furnaces, with a large spherical wrought-iron regulator for the blast between the engine houses.
To the left of the furnace yard are, or were, the hitting shops; to the right, after the blast furnaces, was the refinery, the the smiths shop, a self-acting incline to lower coal forge and mill use; then the rod lathe, the forge (or puddling forge) followed these mills where bars, sheets and slit rods were made. The rail mill was the lowest, and the sheds extended to the gates at the bottom of the works.
We all know the story – a wager between Samuel Homfray of the Penydarren Ironworks, and Richard Crawshay of Cyfarthfa that Trevithick’s steam locomotive could haul ten tens of iron from Penydarren to Abercynon, and we all know that Homfray won his bet, and Merthyr became known across the world as the home of the first railway.
But have you ever wondered why the bet was made? Perhaps it just a whim between two very rich two men with money to burn. After all the bet was sizeable 500 guineas or something like £40,000 in today’s money. Perhaps it was because Homfray, who had used Trevithick’s engines to drive a hammer in the ironworks, was a pioneer. Or was it because of the Glamorganshire Canal…..?
The Glamorganshire Canal in Merthyr. Photo Courtesy of the Alan George Archive
By the late 18th century, Merthyr was probably the most important manufacturing town in Britain, with a population 8 times larger than that of Cardiff, which was the nearest port. However, the river wharfs in Cardiff were rapidly reaching capacity and could not keep up with the maritime demands made by Merthyr’s four ironworks. In addition, it was prohibitively expensive to get the goods from Merthyr to Cardiff, costing the ironmasters something like £14,000 p.a. – a sum equivalent to around £1m today.
Richard Crawshay. Courtesy of Cyfarthfa Castle Museum & Art Gallery
It was within this context that Richard Crawshay took the lead in lobbying for a Parliamentary Bill in order to get the powers to build a canal from Merthyr to Cardiff, and in 1790 the Glamorganshire Canal Act was passed. The Act provided that a company be formed of The Company of Proprietors of the Glamorganshire Canal Navigation with power to purchase land for making the canal and to carry out the necessary works. The Act also laid down the route that was to be followed, authorised the raising of £90,000 to meet the cost of completing the canal, and laid down the maximum charges for carrying various classes of goods, up to 5d. per ton per mile for carrying stone, iron, timber, etc. and up to 2d. per ton per mile for carrying iron stone, iron ore, coal, lime-stone, etc. It also stated that the distribution of Company profits was not to exceed £8% per annum upon the capital sum actually laid out in making the canal.
The Canal Company appointed a Committee from amongst its shareholders to be responsible for the management of the Company’s affairs, and the first Committee meeting was held on 19 July 1790 at the Cardiff Arms Inn, when it was decided to enter into a contract with Thomas Dadford senior, Thomas Dadford junior and Thomas Sheasby to construct the canal at a cost of £48,228, exclusive of the cost of land. This is about 3 times the annual cost of sending goods to Cardiff, so it was estimated that all costs would be recouped in as little as three years.
Construction work started in August 1790 and it was a massive undertaking – over its length of 25 miles, the land drops by 543 feet, so it was necessary to build 51 locks, some double, and one in Nantgarw, a triple lock; some locks were 10 feet high and the one in Aberfan topped 14’6″. In addition. there was the necessity for an aqueduct to be built at Abercynon, a tunnel under Queen St in Cardiff, several feeders to be created and, as the canal came closer to Merthyr, it had to be cut through sheer mountain rock. By 1794, however, there was a functioning and effective new transport link between Merthyr and Cardiff at a final cost of £103,600.
Aberfan Lock. Photo courtesy of the Alan George Archive
But even before the canal was completed it had become clear that it needed to be extended beyond Cardiff so as to give access directly to the sea. Another £20,000 was raised by subscription and a deal was struck with the Marquis of Bute, who owned the land, to build a sea lock and canal basin, which enabled ships of 200 tons to dock. The Sea Lock itself was 103 feet long with gates 27 feet wide.
The canal made transport to Cardiff very cheap, but generated very high revenues. It was designed to take canal boats of up to 25 tons, each drawn by a horse, with a man and a boy. By 1836 there were about 200 boats on the canal, each doing 3 round trips every fortnight. That’s a lot of tonnage at an average of 3d a ton.
But all was not well in the Committee. From the start, it was dominated by Richard Crawshay, who tended to regard the canal as his and his attempts to squeeze the profits of the other ironmasters was bitterly resented. As early as 1794 Richard Hill Of the Plymouth Works complained that the Canal Company was using water from the river that was legally his. Guest, in Dowlais, was also vocal about how we could access the canal from his works. A branch canal seemed impractical so a tramroad was proposed to which the canal company contributed £1000. This was competed in 1791 – before the canal. The Crawshays built a second tramroad between the Gurnos Quarry and their works in Cyfarthfa and a third was built in 1799 by the Hills, linking the Morlais Quarry with the Dowlais to Merthyr Tramroad at Penydarren.
But by 1798, tensions in the committee were so great that they blew. As a consequence, the other ironmasters were dropped for the canal committee, leaving only Crawshay, and it was another 26 years before they rejoined. But discussions took place between them about how to break the Crawshay stranglehold of the canal, and the answer seemed to be the construction of a tramroad from Merthyr, to meet the canal at Abercynon. This tramroad, which opened in 1802 and was built without an Act of Parliament, linking the two existing tramroads from Dowlais to Merthyr and from Morlais to Penydarren. From the point of view of Guest, Homfray and Hill, although the trams using it were horse drawn, this new tramroad avoided the delays caused by the locks between Merthyr and Abercynon.
This is the background to the bet that was made between Homfray and Crawshay. Could the new stream locomotive pull a load of iron? Could it supersede canal power?
We all know that it did, but broke the rails on the way down, so could not come back. But progress had been made. The Taff Vale Railway Company opened as far as Abercynon only 40 years later, and to Merthyr a year later and the canal’s decline was inexorable and it had all but ceased by 1900.
Looking back, it is reasonable to ask, if there had been no canal, where would the home of the steam locomotive be? Not Merthyr, that’s for sure.
Cwm Cannaid Tramroad: We do not know when this tramroad was constructed. We would guess it was sometime around 1800-1814. Despite its name, the tramroad was built before the shaft of Cwm Cannaid Colliery was sunk. The track was shown clearly on the 1814 Ordnance Survey Map and on Robert Dawson’s 1832 Boundary Commission Map whereas the shafts of Cwm Cannaid Colliery were apparently sunk about 1845. The purpose of the tramroad was to relieve the inefficient old tub canal, or coal canal, sometimes called the Cyfarthfa Coal Canal, of the 1770s. The latter transported coal (and perhaps ironstone?) in two-ton tubs from levels (some suggested via dangerous leats) in Cwm Cannaid to Cyfarthfa Works: some say horse-drawn, others say hauled or pushed by men and women. The Cyfarthfa Coal Canal was closed around 1835, which gives an explanation of Cwm Cannaid Tramroad on Robert Dawson’s 1832 Boundary Commission Map.
The tramroad followed roughly the route of the old coal canal: the latter a twisting route, the former almost a straight line. It skirted Glyn Dyrys Ironstone Mine, a coal shaft below Lower Colliers Row, in front of Lower Colliers Row itself, Tir Wern Uchaf (where it crossed the canal twice), a link to Cwm y Glo Colliery and Ironstone Mine, Upper Colliers Row, Tir Heol Gerrig and hence to the coke ovens and yards above (to the west) of Cyfarthfa Works.
Lower Colliers Row. Photo courtesy of the Alan George Archive
When Cwm Cannaid Pit was sunk in 1845, that became the terminus of the system. The 1901 Ordnance Survey Map named it ‘Cwm Pit Railway’, and the line linking it to ‘Gethin Railway’ was labelled ‘railway in course of construction’. We saw the remnants of these mines, canal and tramroad in the 1940s and 1950s, and often walked the old canal embankment, by then well wooded.
A section of the 1901 Ordnance Survey Map showing the tramroad marked as ‘Cwm Pit Railway’. Lower Colliers Row and the old Cyfarthfa Canal are also shown.
Again, industrial despoliation was reverting to nature: delicious wild strawberries on the old waste tipping, a nightingale singing by the disused and reed-covered canal reservoir, woodcock and common snipe, pied flycatchers and wood warblers, and numerous other birds; with wild orchids amongst the damp marshy vegetation with dragon-flies, damsel-flies, glow-worms and water-boatmen. We doubt if this still exists in the coniferous plantations which replaced them all in more recent years.
Dowlais Tramroad: This was constructed about 1792-93 to connect Dowlais Works with Pont y Storehouse near the Glamorgan Canal terminus, roughly near present-day Jackson’s Bridge. It gave Dowlais Works access to the then ‘recently’ constructed Glamorgan Canal. The route may well have followed initially the Morlais Quarry Tramroad from Dowlais via Gelli Faelog, keeping to the Gelli Faelog side of Nant Morlais. The 1793 extension from this tramroad is today represented by the main road and high pavement from Trevithick Street down to Pont Morlais and thence via the tunnel, formerly a bridge, into Bethesda Street to Jackson’s Bridge. Did the Glamorgan Canal Company pay the £1,100 for the construction of the tramroad (and Jackson’s Bridge) in lieu of the proposed linking canal from Merthyr Tudful to Dowlais?
Bethesda Street in the 1950s. The car is parked on what was the where tramway exited the tunnel mentioned above and continued to the Glamorganshire Canal at Pontstorehouse. Photo courtesy of the Alan George Archive
Gethin Tramroad: This tramroad or railway linked Gethin Colliery (sunk between 1845 and 1849 and opened 1849) initially, and Castle Colliery later (1860s?), with Cyfarthfa Works, taking a route in between those of Cwm Cannaid Tramroad and Ynys Fach Tramroad. No tramroad was shown on the 1850 Tithe Map and Schedule. By 1886 the track left Castle Colliery, skirted the hillside west of the Glamorgan Canal between Furnace Row and Tir Pen Rhiw’r Onnen, through Gethin Colliery (with a link to pit-shaft No2), past Graig Cottage and a bridge over Nant Cannaid. At (the 1853) Cyfarthfa Crossing it curved northwestwards past Tir Wern Isaf and Tir Llwyn Celyn, looping under the 1868 Brecon and Merthyr Railway near Heol Gerrig, and thence to the coke yards.
Gethin Colliery. Photo courtesy of the Alan George Archive.
By 1886 the route was upgraded to the GWR and Rhymney Railway as far as the Cyfarthfa Crossing. The 1876 six-inch Ordnance Survey Map showed the terminus for the ‘cwbs’ at the rear of Cyfarthfa Works. The 1901 Ordnance Survey Map called it ‘Gethin Railway’. Our grandfather used the railway to get to work at Castle Colliery, and we regularly used this route (then upgraded to a full railway) in the 1940s and 1950s on our daily journeys to and from school at Quakers Yard. One of us was on the last train to use this line before the viaduct between Quakers yard and Pont y Gwaith was found to be unsafe.
Gyrnos Quarry Tramroad: This was used to bring limestone from Gyrnos Quarry (Graig y Gyrnos) alongside Tâf Fechan, past the limekilns and coal yards, over Afon Tâf by Pont Cafnau to Cyfarthfa Works. We have no details of dates, but walked the route many times in the 1950s in search of dippers, kingfishers, grey wagtails and the rest. It was the first tramroad recorded in the 1805 list of John Jones and William Llywelyn: 1 mile 106 yards to Cyfarthfa Furnaces and just over 1¾ miles to the new Ynys Fach Furnaces. In view of the size of the quarry, it must have transported many tons of material.
