Memories of Old Merthyr

We continue our serialisation of the memories of Merthyr in the 1830’s by an un-named correspondent to the Merthyr Express, courtesy of Michael Donovan.

But I have wandered somewhat, so to return – having given Cyfarthfa its innings, and let us begin with the personnel of Plymouth, or rather, of Plymouth, Pentrebach and Dyffryn.

Part of the derelict Plymouth ironworks in the 1900s. Courtesy of the Alan George Archive

The upper part formed a portion of the taking of Mr Bacon, and the ‘Furnace Isaf’ was leased from him by the father of Messrs Hill. Upon his death the firm became Richard, John and Anthony Hill. Richard, the eldest son, was a fine specimen of the old English gentleman. John was not so robust, but keen, fond of horses, betting and of gaiety. Anthony, studious, precise and particular. He lived to become the sole proprietor after years of hard work and earnest attention.

As characteristic of Richard Hill, he, as well as his brothers, were Tories, and on the return of a member for Cardiff had a chairing. He was known as ‘Honest Dick from the Mountain’. Richard Hill  died at Court yr Alla, and rests in the churchyard near there (Michaelston-le-Pit, I believe). John in Bath, and Anthony lonesome at Pontyrhun. They had a sister who died a spinster at Clifton in 1847 or so. It is a matter of regret that the trustees of Mr A. Hill’s will did not see their way to let the works pass into the hands of one of the relatives, but that is forestalling events.

References to ‘Mushet on Iron’ will show that the blast furnaces at the Dyffryn and the blowing engine there were of note. The engine was a departure from the ordinary proportion which was between the steam and blast cylinders, and, as far as can be recalled, the blast cylinder was the largest (120 inches diameter) and the furnace boshes were also the largest, but the greatest achievement of Mr A. Hill was the utilisation of cinders. This he patented, and heavy litigation followed. He won the first action, and being defeated at a subsequent time, would not go on again, as he was strongly advised to do. This soured his feelings, and he always entertained a bitterness of feeling with respect to it, for he verily believed perjury had been used.

There was another matter in the making of iron he was virtually the pioneer of, viz, the use of oxides of iron in the blast furnace. The manager of the furnace was a Mr Edward Thomas, the great-uncle to Mr Wm. Thomas of Oakfield, Aberdare. When Mr Hill was quite clear that pig iron could be commercially made from hematite, he endeavoured to come to an arrangement with the Earl of Lonsdale for him to find the necessary coal and Mr Hill the ore, so as to make iron at Whitehaven. Should any of your readers be in that locality and find the original engine-house yet in existence, they will find a goat’s head with ample horns cut on the keystone of the arch in the walls. This was as a compliment to Mr Thomas.

Shortly after Mr Thomas went to America , and erected works there. He returned toward the end of the thirties, and after spending a few months at the Ivor Works, I think led a quiet life. Upon leaving Dowlais, Sir John Guest desired him to return after a while, although he promised to think over it ‘after the cuckoo had come’, he never returned there.

To be continued at a later date.

Merthyr’s Ironmasters: The Hill Family

Richard Hill I (died 1806), who had had experience in Anthony Bacon’s iron-works (at Cyfarthfa and Hirwaun), became Bacon’s trusted manager of the Plymouth Ironworks. He was elected a burgess or freeman of Cardiff in 1784. He married Mary, the sister of Mrs. Bacon, and named his youngest son (born in 1784) Anthony, after Anthony Bacon. On the death of Anthony Bacon, as all the natural children were minors, the estate was placed in Chancery, and the receiver, William Bacon, granted a lease of the Plymouth furnace for fifteen and a half years from Christmas Day 1786, to Richard Hill I, during the minority of Thomas Bacon; this was approved by the Court of Chancery. Hill entered into an arrangement with Richard Crawshay of Cyfarthfa, to supply the latter with pig-iron, and seeing the possibility of increasing his output and of enlarging his works, he secured several leases in order to extend the mineral property attached to the works. About 1794, Richard Hill I had very serious trouble with the Glamorganshire Canal Navigation, then recently opened, for improperly taking the water from the Taff river which he required for his Plymouth works. Richard Hill II (died 1844), his son, then aged twenty, closed the sluices between the canal and the mill-race, and had a desperate encounter with the canal lock-keeper, as a result of which the lock-keeper was awarded substantial damages at the Glamorgan Great Sessions. At the next Great Sessions, Richard Hill I obtained a verdict in his favour and was awarded £300 damages for injury to his works by the Glamorganshire Canal.

In 1799, Thomas Bacon, who had been granted the Plymouth works under his father’s will, became of age, and agreed to surrender to Richard Hill I all his interest in the Plymouth works, and this he confirmed in 1803 when he was 24 years of age. Being now in full possession of the Plymouth works, he with his sons, Richard II and John Hill, entered into an agreement with the Dowlais and Penydarren iron companies for the construction of a tram road for their joint use, from their works to join the Glamorganshire canal at Navigation (now Abercynon). In the same year, 1803, Richard Hill I, who was a practical engineer, agreed to construct a tram road for the joint use of the same three companies to convey limestone from the Morlais Castle quarries. It will thus be seen that Richard Hill was on very good terms with the neighbouring ironmasters, which was far from being the case between the Penydarren and Dowlais companies.

Richard Hill and son were anxious to improve their business by adding a forge and mills, but were very short of capital for such extension. Partners were sought, and A. Struttle advanced £15,000 and John Nathaniel Miers (son-in-law of Richard Hill I), £5,000 to form the Plymouth Forge Company with a capital of £20,000. Work now proceeded briskly at the Plymouth iron-works where Richard Hill I was ably assisted by his sons, Richard II and Anthony Hill (1784 – 1862). But on 20 April 1806, Richard Hill I passed away leaving all his estate to his widow, Mary, his three sons, Richard II, John Hill (of London), and Anthony Hill, and his two daughters, Elizabeth, and Mary, the wife of J. N. Miers (of Cadoxton Lodge). By 1813, Messrs. Struttle and Miers seceded, and the three brothers became partners. On account of the withdrawal of capital, the brothers had to obtain a loan on mortgage of £54,000 from Messrs. Wilkins of the Brecon Old Bank. Richard Hill II for a time lived at Llandaff and looked after the sales side of the business, while Anthony ably managed the productive side, but the burden of the huge loan was a great impediment for many years to the successful working of the concern.

In 1806, the three furnaces at Plymouth produced 3,952 tons of pig-iron, while in 1815 the same three turned out 7,800 tons. A fourth furnace was erected at Plymouth and in 1819 the first furnace was erected at Dyffryn and c. 1824 two others were erected; like all the others these were worked by water-power in which Anthony had great faith — he was very slow in adopting steam-power as the other iron-masters were doing. With Anthony Hill as managing-partner the works were carried on with great vigour and ability, and their brand of bar-iron had a special value and was known for its excellence throughout the world. The produce of the blast furnaces continued to increase year by year. In 1820, it was 7,941 tons, in 1830, over 12,000 tons, by 1846, it was over 35,000 tons.

In 1826 John Hill sold out his interest to his brothers, Richard II and Anthony. Later, No. 8 furnace was built, which was said by Mushet, the great authority on iron manufacture, to be the largest in the world. Richard and Anthony continued as sole managers until the death of Richard in 1844, after which Anthony continued as sole managing director until his own death at the age of seventy-eight on 2 August 1862. Anthony Hill was regarded as the most scientific iron-master of his district. He carried out many experiments for the improvement of iron-making, and was the patentee of many new methods. Gradually he succeeded in paying off the loan burden and attained great wealth. His death was keenly felt in the district, as he had been ‘associated with good deeds, with broad and enlightened measures for his people’s comfort, for their religious welfare, and their education.’ He established a new church at Pentre-bach, and endowed it with £200 per annum; he also founded the Pentre-bach National School and left a sum of money for the ‘Anthony Hill scholarship’ for secondary schools which is still in existence. After his death the works were sold to Messrs. Fothergill, Hankey and Bateman for £250,000; they came to an end c. 1880.

The remains of the Plymouth Ironworks. Photo courtesy of http://www.alangeorge.co.uk/index.htm

Many thanks to the Dictionary of Welsh Biography for allowing me to reproduce this article. To view the original, please follow this link –  https://biography.wales/article/s-HILL-PLY-1786